Application Example For 802.1Q Vlan - TP-Link T3700G-28TQ User Manual

Step Operation
4 Delete VLAN

7.2 Application Example for 802.1Q VLAN

Network Requirements

Switch A is connecting to PC A and Server B;

Switch B is connecting to PC B and Server A;

PC A and Server A is in the same VLAN;

PC B and Server B is in the same VLAN;

PCs in the two VLANs cannot communicate with each other.

Network Diagram

Configuration Procedure

Configure switch A

Step Operation
1 Configure
Link Type of the
ports
2 Create VLAN10
3 Create VLAN20
Description
Optional. On the VLAN→802.1Q VLAN→VLAN Config page,
select the desired entry to delete the corresponding VLAN by
clicking the Delete button.
Description
the Required. On VLAN→802.1Q VLAN→Port Config page, configure
the link type of Port 2, Port 3 and Port 4 as ACCESS, TRUNK and
ACCESS respectively
Required. On VLAN→802.1Q VLAN→VLAN Config page, create a
VLAN with its VLAN ID as 10, owning Port 2 and Port 3.
Required. On VLAN→802.1Q VLAN→VLAN Config page, create a
VLAN with its VLAN ID as 20, owning Port 3 and Port 4.
75