Configuration Example For 802.1Q Vlan; Network Requirements; Configuration Scheme - TP-Link Omada DS1024GE User Manual

Configuring VLAN
5

Configuration Example for 802.1Q VLAN

5.1

Network Requirements

As the following figure shows, a company has two departments. Hosts of the same
department are located in different places and connected to different switches
respectively.
It's required that:
■ Hosts of both departments can access the internet.
■ Hosts of the same department can communicate with each other, but hosts of different
departments cannot.
Figure 5-1 Network Topology
Host A1
Switch A
5.2

Configuration Scheme

To implement the above requirements, configure 802.1Q VLAN on both switches.
■ Create VLAN 2. On Switch A, add port 2 and port 4 to VLAN 2, while on Switch B, add
port 1, port 2 and port 4 to VLAN 2.
VLAN 2
Department A
Port 2 Switch B
Port 4 Port 4
Port 3
VLAN 3
Department B
Host B1
Host A2
Port 2
Port 1
Port 3
Host B2
Configuration Example for 802.1Q VLAN
User Guide 53