Static Multicast Ip - TP-Link T2500G-10TS User Manual

Step Operation
4 Enable Multicast
VLAN
5 Check Multicast
VLAN

9.1.6 Static Multicast IP

Static Multicast IP table, isolated from dynamic multicast group and multicast filter, is not
learned by IGMP Snooping. It can enhance the quality and security for information transmission
in some fixed multicast groups.
Choose the menu Multicast→IGMP Snooping→Static Multicast IP to load the following page.
The following entries are displayed on this screen:
Create Static Multicast

Multicast IP:
VLAN ID:
Forward Port:
Description
Enable Multicast VLAN, configure the VLAN ID of a multicast
VLAN as 3 and keep the other parameters as default on
Multicast→IGMP Snooping→Multicast VLAN page.
3-5 and Multicast VLAN 3 will be displayed in the IGMP
Snooping Status
Snooping→Snooping Config page.
Figure 9-10 Static Multicast IP Table
Enter static multicast IP address.
Enter the VLAN ID of the multicast IP.
Enter the forward port of the multicast group.
135
table on the Multicast→IGMP