Canon CLC5151 Copying And Mail Box Manual page 80

2
2
2-26
Paper Selection
NOTE
• If you press [Original Settings], the settings for documents stored in inboxes from a computer or
using the Store In User Inbox mode of the Copy function are returned to the settings specified at
the computer, and the settings for documents scanned and recorded at the machine are returned
to the Standard Local Print Settings. (See Chapter 4, "Customizing Settings," in the Reference
Guide.)
• The paper size/type that can be used may vary depending on the settings for the finisher. (See
"Collating Copies/Prints," on p. 3-33.)
Select the desired paper size.
IMPORTANT
If you want to print a scanned document whose size has been specified as [A3+] in Document
Size Select, load the stack bypass with 305 mm x 457 mm or 320 mm x 450 mm paper, or load a
paper drawer with 320 mm x 450 mm paper.
NOTE
• If you select [Envelope], [Tracing Paper], [Transparency], [Labels], [Tab Paper], or [Washi (JPN
paper)], make sure that you do not specify any Finishing modes (Collate, Group, or Staple).
• If Stack Bypass Standard Settings in Common Settings (from the Additional Functions screen) is
set to 'On', and the paper size/type have been stored, the selected paper size/type are displayed
on the screen. (See Chapter 4, "Customizing Settings," in the Reference Guide.)
If you want to set the machine to automatically select a paper size:
Press [Auto].
If you want to select a paper size manually:
Select the desired paper size.