3
4
4
5
4-6
What are Special Features?
Select the desired mode from the Special Features screen.
IMPORTANT
Depending on the mode, you may have to place your original on the platen glass or in the feeder.
See the corresponding section on each mode for detailed information.
Set the desired mode.
For more information on setting each mode, see the corresponding section.
To set other modes at the same time, repeat steps 3 and 4.
Press
.
If the original is placed on the platen glass, follow the instructions that appear on the touch
panel display
press
once for each original. When scanning is complete, press [Done].
Scanning starts.