Collating Copies/Prints
The Finishing modes can be selected to collate the outputs in various ways, either by pages or
copy/print sets.
IMPORTANT
• For information on the modes which cannot be set in combination with this mode, see "Unavailable
Combination of Functions," on p. 9-6.
• The Finishing modes cannot be set if envelopes, transparencies, tracing paper, labels, tab paper, or
washi (Japanese paper) is selected.
• If Tray B (Copy Tray-M1) is set as the output tray and a finisher is not attached to the machine, copies
are output in the opposite order to the originals, because they are output face-up. Therefore, change the
output tray for the Copy function to Tray A (center output tray) or Tray C (Copy Tray-N1) in Tray
Designation in Common Settings (from the Additional Functions screen). (See Chapter 4, "Customizing
Settings" in the Reference Guide.)
NOTE
• For information for the optional finishers, see Chapter 3, "Optional Equipment," in the Reference Guide.
• To cancel this setting, press [Finishing]
[Cancel].
Collating Copies/Prints
3
3-33