Canon CLC5151 Copying And Mail Box Manual page 168

IMPORTANT
• Only A4 paper can be used for Book
• If you select [Front/Back 2-Sided], the front side of the first two-sided page and the back side of the last
two-sided page are left blank. (The machine's counter does not count the blank pages as copies.)
• Place your original on the platen glass. The Book
placed in the feeder.
NOTE
The Book
1
3
2
3
4
5
3-52
Two-Sided Copying/Printing
2-Sided mode is available for the Copying function only.
Place your original on the platen glass
If necessary, see the screen shot in step 1 of "Copying" in "1 to 2-Sided," on p. 3-46.
To make copies in the correct page order, begin copying from the first open page of the book or
bound original.
Place your original face down, making sure that its top edge is aligned with the back edge of the
platen glass (by the arrow in the top left corner).
Press [Book 2-Sided]
Select the desired type of two-sided layout
Details of each item are shown below.
[Left/Right 2-Sided]: The facing pages of a book or bound original are copied onto the front
and back sides of a single sheet of paper.
[Front/Back 2-Sided]: The front and back sides of the left page, or the front and back sides of
the right page, are copied onto the front and back sides of a single
sheet of paper.
Press .
To copy the next two facing pages, turn the page of the original
platen glass press .
Scanning starts.
When scanning is complete, press [Done].
2-Sided copying.
2-Sided mode cannot be used when the original is
press [2-Sided].
[Next].
press [OK].
place your original on the