Canon CLC5151 Copying And Mail Box Manual page 376

7
3
7-52
Book/Page Edit/Shift Settings
IMPORTANT
• The paper used for the cover page must be the same paper size as that which is used for
copying the main document.
• If you are using Heavy 2 paper for the cover sheets, you can only print on the inside of the front
cover or inside of the back cover.
• 64 to 105 g/m
2
paper can be used for the main document.
• Paper of the following weight can be used as a cover sheet:
- If you are printing on the front cover or back cover: 64 to 209 g/m
- If you are printing on the inside of the front cover or inside of the back cover: 64 to 253 g/m
• The orientation to place the side of the paper to use for the cover page in the stack bypass
depends on the type of the paper, as shown below:
- Plain, Recycled, Color, Bond, Heavy 1: face up
- Heavy 2: face down
• If you select [Add Cover], you cannot specify the stack bypass as the paper source used for the
main document.
Select whether to saddle stitch the booklet.
If you select [Divided Booklet], enter the number of sheets that you want to divide by
pressing [-] or [+] press [OK].
If the printing position of the image is out of place, and you want to set the creep
(displacement) correction, press [Creep Correct]
[OK].
If you select [Manual], press [ ] or [ ] to adjust the correction width.
IMPORTANT
The maximum number of sheets, including cover sheets, that can be saddle stitched is:
2
- 15 sheets (64 to 80 g/m
- 10 sheets (81 to 105 g/m
Set the Booklet Tray guide to match the paper size.
A3/305 mm x 457 mm
)
2 )
2
select [Auto] or [Manual]
A4R
2
press [OK]