4
5
6
Making Copies by the Original Image Repeated (Image
Repeat)
For instructions on this procedure using the Regular Copy Basic Features screen, see "Image
Repeat," on p. 4-61.
IMPORTANT
• To use Area Designation (Framing) with the Image Repeat mode, first specify the Image Repeat mode,
and then designate the desired area. Only one area can be designated.
• If the colour mode is set to 'Auto-Color Select', and the number of times the image to be repeated is set
7
to too many or the designated area is too small, the colour original may be scanned in the Black mode.
1
7-72
Process/Layout Settings
Press [Framing] or [Blanking].
Details of each item are shown below.
[Framing]: Copy only the contents of the designated area while discarding the rest of the
original.
[Blanking]: Copy the original by blanking out the contents of the designated area.
Press [Next]
select [Shift center] or [Do not shift center].
If only [Blanking] is selected, this step is unnecessary. Skip to step 6.
Press [OK]
[Done].
Press [Process/Layout]
[Image Repeat].