Canon CLC5151 Copying And Mail Box Manual page 202

3
4
4-24
Booklet Mode
If the original is two-sided, press [2-Sided Original]
press [OK] [Next].
Details of each item are shown below.
[Book Type]: The front and back sides of the original have the same top-bottom
orientation.
[Calendar Type]: The front and back sides of the original have opposite top-bottom
orientations.
NOTE
• To select an inch paper size, press [Inch-size].
• [2-Sided Original] cannot be selected if A5R or A6R is the selected original size.
Select the desired paper size
If the optional Saddle Finisher-W2 is not attached, press [OK].
Only A3, A4, or 305 mm x 457 mm paper can be used for the Booklet mode.
If you want to add a cover:
Press [Add Cover] [Next].
Select whether to copy on the cover page
Select the desired paper type for the cover page
If the optional Saddle Finisher-W2 is not attached, press [OK].
IMPORTANT
• You must select the same paper size for the cover page as that used for copying the main
document.
• If you are using Heavy 2 paper for the cover sheets, you can only print on the inside of the front
cover or inside of the back cover.
• Only 64 to 105 g/m
2 paper can be used for the main document.
• Paper of the following weight can be used as a cover sheet:
- If you are printing on the front cover or back cover: 64 to 209 g/m
- If you are printing on the inside of the front cover or inside of the back cover: 64 to 253 g/m
• The orientation to place the side of the paper to use for the cover page in the stack bypass
depends on the type of the paper, as shown below:
- Plain, Recycled, Color, Bond, Heavy 1: face up
- Heavy 2: face down
• If you select [Add Cover], you cannot specify the stack bypass as the paper source used for the
main document.
select the type of two-sided original
press [Next].
press [Next].
press [Next].
2
2