Canon CLC5151 Copying And Mail Box Manual page 136

4
3
Mail Box (Scan)
1
2
Making Copies (Scanning) with Different XY Copy/Zoom Ratios
(XY Zoom)
Copying
1
2
3-20
Changing the Copy (Zoom) Ratio
You can enter either the width or the length of the original size. If you enter the width for the
original size, make sure to enter the width for the copy (record) size as well, and vice versa.
The machine automatically calculates the correct copy (zoom) ratio based on the values you
entered; however, the original image may be cut off slightly depending on the paper (record)
size.
If the computation results in a zoom ratio less than 25% or greater than 400%, a message
appears telling you that values below 25% will be set to 25%, and values above 400% will be
set to 400%.
NOTE
To specify the horizontal (X) and vertical (Y) axis independently, press [XY Zoom].
Press .
Select the desired User Inbox number
[Scan] [Copy Ratio].
If necessary, see the screen shot in step 1 of "Mail Box (Scan)" in "Preset Zoom," on p. 3-10.
Specify the Zoom Program (Zoom) mode and scan originals in
accordance with steps 2 and 3 of "Copying," on p. 3-19.
For the Mail Box function, enter the Original Size and Record Size.
Place your originals
If necessary, see the screen shot in step 1 of "Copying" in "Preset Zoom," on p. 3-10.
Press [Zoom Program].
If necessary, see the screen shot in step 2 of "Copying" in "Reducing/Enlarging Using the
Original and Copy/Record Sizes," on p. 3-17.
place your originals
press [Copy Ratio].
press