Prevent Bleeding
This mode enables you to prevent the original image on the reverse side of thin originals from
appearing on the recorded pages or the copies.
Copying
1
2
3
4
4-80
Adjusting the Image
Place your originals
Press [Image Qual. Adjustment].
Press [Prevent Bleed-thru]
If you want to make fine adjustments to the density, press [Fine Adjustment]
specify the amount of bleeding that you want to prevent
Details of each item are shown below.
[-]:
This setting prevents dark areas on the reverse side of the original from appearing on the
recorded pages or the copies, but light areas on the front side may not be scanned/copied
either.
[+]:
This setting may not be able to completely prevent dark areas on the reverse side of the
original from appearing on the recorded pages or the copies, but light areas on the front
side of the original are always scanned/copied.
NOTE
If you make fine adjustments to the density, the automatic copy exposure setting is cancelled,
and the original is scanned according to the Fine Adjustment settings.
press [Special Features]
[OK].
[Image Adjustment].
press [-] or [+] to
press [OK].