Recalling Previous Copy Jobs
You can recall the three most recent copy jobs and make copies using these settings.
IMPORTANT
• The machine considers any one of the following operations a copy job:
- When copy settings, such as the copy ratio, number of copies, and copy exposure, are specified and
then, the control panel power switch,
- If and when the Auto Clear mode activates after copy settings are specified
- If you recall copy settings stored in Mode Memory
Therefore, if you make settings but do not press the control panel power switch,
Auto Clear mode does not activate, the settings you have made are not stored memory for recall by
pressing [Recall].
• You cannot recall the Job Block Combination mode.
5
• The Standard mode is not stored in Recall memory.
• Identical copy settings are stored only once in Recall memory.
NOTE
• The Recall mode is available for the Copying function only.
• Once stored, the last three copy jobs are kept in memory even if the power is turned OFF.
1
2
5-2
Recalling Previous Copy Jobs
Place your original
Select [1 Before], [2 Before], or [3 Before].
,
, or
is pressed
press [Special Features]
,
, or
, and the
[Recall].