Canon CLC5151 Copying And Mail Box Manual page 241

3
Set the number of times that you want the image to repeat for both the
vertical and horizontal directions.
If you want to set the number of repeats automatically:
Press [Auto].
If [Auto] is already selected, this step is not necessary.
If you want to set the number of repeats manually:
Press [-] or [+] to set the number of times that you want the image to repeat.
IMPORTANT
The repeated images may overlap or have gaps between them, depending on the number of
repeats that you set.
4
If you want only a designated area on the original to be repeated, press
[Framing].
If you are not designating an area to repeat, proceed to step 6.
5
Designate the area.
NOTE
If you designate an area using the edit pen, the output image may not reflect the designated area
precisely. To designate an area precisely, entering values by using the numeric keys is
recommended.
Using Image Creation Modes
4
4-63