Canon CLC5151 Copying And Mail Box Manual page 243

NOTE
• To change a value you entered, press [X1], [X2], [Y1], or [Y2]
- (numeric keys).
• To check the designated area, press [Check Area].
• To clear all your entries, press [Clear Area].
6
To specify the amount of the space between repeated images, press
[Margin Settings].
If you do not specify [Margin Settings], proceed to step 8.
7
Specify the amount of space between repeated images using [-] and
[+].
If you want to set the same amount of space for all four sides:
Press [-] or [+] to set the amount of space
If you want to set the top, left, right, and bottom spaces independently:
Press [Independent Adjustment].
Select the space to adjust
To return to the screen for setting the same amount of space for all four sides, press
[Uniform Margin].
8
Press [OK].
If you need to designate the same area for multiple originals using the edit pen, remove the
original from the platen glass after specifying the area
press .
press [OK].
press [-] or [+] to set its size
place all of the originals in the feeder
Using Image Creation Modes
enter the correct value using
press [OK].
4-65
4