Recalling a Previous Copy Setting (Recall)
For instructions on this procedure using the Regular Copy Basic Features screen, see
"Recalling Previous Copy Jobs," on p. 5-2.
IMPORTANT
• One copy job is defined by setting the number of copies, exposure, zoom, etc., and by pressing the
control panel power switch,
job stored in memory. If one of these keys was not pressed, or if the Auto Clear function is not active,
calling up a copy job by pressing [Recall] is not possible.
• You cannot recall the Job Block Combination mode.
• The Standard mode cannot be recalled or stored.
• Identical copy modes that are stored, are counted as one setting.
1
7
2
7-36
Making a Copy With the Express Copy Basic Features Screen
,
Press [Recall].
Select either [1 Before], [2 Before], or [3 Before].
or
, when the Auto Clear function is 'On', or by calling up a copy