Margin Mode
This mode enables you to make copies or prints with the entire original image shifted by a
designated width to the left, right, top, or bottom in order to create a margin on the copies. Use
this mode to make copies or prints ready for placement in ring binders.
4
IMPORTANT
• For information on the modes which cannot be set in combination with this mode, see "Unavailable
Combination of Functions," on p. 9-6.
• The Margin mode shifts the entire original image by the designated width. Therefore, an original whose
image extends all the way to the edges of the sheet may be partially cut off on the copy.
NOTE
• You can choose to only create a margin on the back side of a copy. Therefore, originals that already
have a margin can be copied in the 1
• For instructions on entering values in inches, see Chapter 2, "Basic Operations," in the Reference
Guide.
4-40
Margin Mode
Original
Left Margin
Selected
Top Margin
Right Margin
Selected
Selected
2-Sided mode or 2
1-Sided mode.
Bottom Margin
Selected