To 1-Sided - Canon CLC5151 Copying And Mail Box Manual

2 to 1-Sided

This feature automatically turns over two-sided originals placed in the feeder to make one-sided
copies on different sheets of paper.
3
IMPORTANT
Make sure to place originals with a horizontal (landscape) orientation, such as A4R and A5R,
horizontally. If these originals are placed vertically, the back side of the copy is printed upside down.
NOTE
• The 2 1-Sided mode is available for the Copying function only.
• If you want to place your two-sided original on the platen glass, use the Job Build mode in Special
Features to execute 2 1-Sided copying. (See "Job Build," on p. 4-53.)
1
2
3-50
Two-Sided Copying/Printing
Originals
Place your originals in the feeder
If necessary, see the screen shot in step 1 of "Copying" in "1 to 2-Sided," on p. 3-46.
NOTE
If Auto Collate in Copy Settings (from the Additional Functions screen) is set to 'On', the Collate
or Offset Collate mode is automatically set when you place your originals in the feeder. (See
"Auto Collate," on p. 8-9.)
Press [2 1-Sided].
To set the orientation of the originals, press [Option]
press [Done].
Details of each item are shown below.
[Book Type]: The front and back sides of the original have the same top-bottom
orientation.
[Calendar Type]: The front and back sides of the original have opposite top-bottom
orientations.
Copies
press [2-Sided].
select the orientation of the originals