Select the desired paper type
If you are copying onto the back side of a previously printed sheet, press [2nd Side of
2-Sided Page].
NOTE
[Transparency] can be selected only if [A4] or [A4R] is selected as the paper size.
To copy on nonstandard size paper loaded in the stack bypass:
Press [Stack Bypass].
If you want to select the stack bypass when a paper size/type is already selected for the
current or reserved job, press [Stack Bypass Settings] to specify the desired paper size/type.
Press [Irreg. Size].
Press [X] (horizontal axis)
Press [Y] (vertical axis)
Press [OK].
You can also press a size key in which a paper size is registered ([S1] to [S5]), instead of
entering a value.
press [OK].
enter a value.
enter a value.
1-15
Paper Selection
1