3
4
Registering a Memory Key Name
For instructions on this procedure using the Regular Copy Basic Features screen, see "Naming
a Memory Key," on p. 5-6.
1
7
2
3
4
7-38
Making a Copy With the Express Copy Basic Features Screen
Select a memory key ([M1] to [M9]) to store a desired mode
[Register].
If you select an empty memory key (no settings have been stored):
Press [Yes], when the confirmation message appears asking you to store the mode.
The memory key registering the copy mode is highlighted, and the registered settings are
displayed.
If you select an occupied memory key (settings have been stored):
Press [Yes], when the confirmation message appears asking you to overwrite the mode.
The memory key registering the copy mode is highlighted, and the registered settings are
displayed.
Press [Done].
On the Mode Memory screen, press [Register].
Select a memory key ([M1] to [M9]) to give a name to
Name].
Enter the new name
Press [Done].
press [OK].
press
press [Register