Canon CLC5151 Copying And Mail Box Manual page 159

If the optional Saddle Finisher-W2 is attached:
Press [Next].
Select the stapling type ([Corner], [Double], or [Saddle Stitch]).
If you want to select [Corner] or [Double]:
• Press [Corner] or [Double]
If you want to select [Saddle Stitch]:
• Press [Saddle Stitch]
• If [Add Cover] is selected, select whether to print on cover
• Select the type of paper for the cover
Load the paper for the cover into the stack bypass.
• Select the paper size
IMPORTANT
• Make sure to use the same paper size for the cover and the main document.
• You can select Heavy 2 paper only if you are not printing on the cover.
• Only 64 to 105 g/m
2
• Paper of the following weight can be used as a cover sheet:
- If printing on the cover: 64 to 209 g/m
- If not printing on the cover: 64 to 253 g/m
• The orientation to place the side of the paper to use for the cover page in the stack bypass
depends on the type of the paper, as shown below:
- Plain, Recycled, Color, Bond, Heavy 1: face up
- Heavy 2: face down
• If you select [Add Cover], you cannot specify the stack bypass as the paper source used for the
main document.
3
Press .
select the stapling position
[Next].
press [Next].
press [OK].
paper can be used for the main document:
2
2
press [OK].
press [Next].
Collating Copies/Prints
3
3-43