Canon CLC5151 Copying And Mail Box Manual page 203

4
Select whether to saddle stitch the booklet
If [Divided Booklet] is selected:
Specify the number of sheets that you want to divide by using [-] and [+]
If the printing position of the image is out of place, and you want to set the
creep (displacement) correction:
Press [Creep Correction]
If you select [Manual], press [ ] or [ ] to adjust the correction width.
IMPORTANT
The maximum number of sheets, including cover sheets, that can be saddle stitched is:
- 15 sheets: (64 to 80 g/m
- 10 sheets: (81 to 105 g/m
NOTE
• If the number of sheets is 16 or more, the booklet is not saddle stitched.
• The number of saddle stitched booklets that the booklet tray can hold depends on the number of
sheets that each booklet contains.
- 1 to 5 sheets: 25 sets
- 6 to 10 sheets: 15 sets
- 11 to 15 sheets: 10 sets
• If you selected [Add Cover], the maximum number of sets that the booklet tray can hold is 10.
• Saddle stitching is not performed if there is only one sheet of output.
• If you set the Booklet mode, the Center Shift mode is also automatically set.
5
Set the Booklet Tray guide to match the paper size.
A3/305 mm x 457 mm
select [Auto] or [Manual]
2 )
2 )
press [OK].
press [OK].
press [OK] [OK].
A4R
Booklet Mode
4
4-25