Canon CLC5151 Copying And Mail Box Manual page 45

NOTE
If there is more than one reserved job waiting to print, only the last paper size/type specified for
the reserved copy job is shown on the Paper Select screen and Regular Copy Basic Features
screen.
4
Press [Done].
This completes the settings for a reserved copy job using the stack bypass. The subsequent
steps show you how to load paper into the stack bypass and complete the scanning and
printing process of the reserved job.
5
Press .
6
When it is time for the reserved copy job to be printed, load the
specified paper into the stack bypass.
NOTE
• The specified paper size/type is displayed on the screen when it is time for the reserved copy job
to be printed.
• Make sure to load the same paper size and type selected in step 3 into the stack bypass. Printing
does not start if paper of a different size or type is loaded.
7
Select the desired paper size.
If the following screen is displayed, adjust the width of the slide guides
press [OK].
specify the paper size
1-25
Reserved Copying
1