Making Copies For Use As A Booklet (Booklet) - Canon CLC5151 Copying And Mail Box Manual

Making Copies for Use as a Booklet (Booklet)

For instructions on this procedure using the Regular Copy Basic Features screen, see "Booklet
Mode," on p. 4-21.
IMPORTANT
• Saddle stitching is not performed when there is only one sheet.
• Saddle stitching can be performed only if the optional Saddle Finisher-W2 is attached.
• The accuracy of folds created in the Saddle Stitch mode may vary, depending on the paper type and the
number of sheets.
• Make sure to place originals with a vertical (portrait) orientation vertically. If these originals are placed
horizontally, the even numbered pages will be printed upside down.
• When printing on special types of paper, such as heavy paper or transparencies, be sure to correctly set
the paper type, especially if you are using heavy paper. If the type of paper is not set correctly, it could
adversely affect the quality of the image. Moreover, the fixing unit may become dirty, or the paper could
jam, and a service repair may be needed.
1
Press [Book/Page Edit/Shift]
2
Press [Set]
Press [Select Original Size]
If the original is two-sided, press [2-Sided Original]
press [OK].
Press [Paper Select]
If you want to add a cover, press [Add Cover], select the paper source for the cover
whether to copy on the cover page
[Booklet].
specify each setting.
set the size of the original to scan.
select the paper source.
select paper type
select the type of two-sided original
press [OK].
Book/Page Edit/Shift Settings
7
select
7-51