Canon CLC5151 Copying And Mail Box Manual page 34

1
1-14
Paper Selection
NOTE
If Drawer Eligibility For APS/ADS in Common Settings (from the Additional Functions screen) is
set to 'Off' for a particular paper source, you cannot make copies on paper loaded in that paper
source in the Automatic Paper Selection mode. (See Chapter 4, "Customizing Settings," in the
Reference Guide.)
To manually select the copy paper size and type:
Select the desired paper size.
NOTE
• The paper sizes/types are indicated by icons on the touch panel display, in the order in which
they are loaded in the paper drawers.
• Icons indicating the type of paper loaded in each paper drawer can be displayed on paper
selection screens, if you store that information into the machine beforehand. (See Chapter 4,
"Customizing Settings," in the Reference Guide.)
•
indicates that the paper is loaded vertically, and
horizontally. The suffix <R> (such as in A4R) used in paper size designations indicates that the
paper is loaded in a paper drawer or the stack bypass horizontally.
To copy on standard size paper loaded in the stack bypass:
Press [Stack Bypass].
If you want to select the stack bypass when a paper size/type is already selected for the
current or reserved job, press [Stack Bypass Settings] to specify the desired paper size/type.
Select the desired paper size
NOTE
To select an inch paper size, press [Inch-size].
indicates that the paper is loaded
press [Next].