2
Select [All Pages] or [Specified Pages]
If you select [Specified Pages]:
Press [First Page] and [Last Page]
3
Press [Start Print].
NOTE
• If you select [Specified Pages], specify the page numbers of the output. Note that the page
numbers of the output may be different from those of the stored document.
• If you select [Specified Pages], the Staple, Hole Punch, or Booklet mode cannot be set.
• You cannot change [All Pages] to [Specified Pages] or vice versa after the sample print is output.
• If you select [Specified Pages], you cannot change the specified pages after the sample print is
output.
4
Check the sample print
Settings].
To print the remaining prints:
Press [Start Print].
To cancel printing:
Press [Cancel].
press [OK].
press [-] or [+] to set their respective page numbers.
select [Start Print], [Cancel], or [Change
2-45
Sample Print
2