Copying
1
2
4
3
4
4-46
Frame Erase
Place your original on the platen glass
[Frame Erase].
Press [Book Frame Erase].
Press [-] or [+] to set the frame erase widths.
If you want to set the same width for all four borders:
Press [Center] and [Sides]
press [Next].
If you want to set the top, left, centre, right, and bottom widths independently:
Press [Adjust Each Dim.].
Select the desired frame erase borders
widths
press [Next].
To return to the screen for setting the same width for all four borders, press [Adjust All At
Once].
Select the size of the bound original when it is open
IMPORTANT
You can set the Book Frame Erase mode only for the original paper sizes shown on the touch
panel display.
press [Special Features]
press [-] or [+] to set their respective frame erase widths
press [-] or [+] to set their respective frame erase
press [OK].