Canon CLC5151 Copying And Mail Box Manual page 30

7
1
8
1-10
Flow of Copy Operations
Press .
If the following screen is displayed, follow the instructions on the touch panel display
once for each original. When scanning is complete, press [Done].
Copying starts.
IMPORTANT
You cannot change copy mode settings, such as the copy quantity and paper size, while the
machine is copying.
NOTE
If there is a current job, the machine scans the original, and waits to print it. Printing starts when
the current job is complete.
If you want to stop, interrupt, or copy another original during a copy
job, follow the instructions below.
If you want to stop a copy job:
Press .
NOTE
• Several copies may be output even after you press
• You can also cancel a copy job from the System Monitor screen. (See "Cancelling a Copy Job,"
on p. 1-17.)
.
press