Copying Separately-Set Originals (Job Build) - Canon CLC5151 Copying And Mail Box Manual

Copying Separately-Set Originals (Job Build)

For instructions on this procedure using the Regular Copy Basic Features screen, see "Job
Build," on p. 4-53.
IMPORTANT
• You cannot change the copy settings while the machine is scanning originals in the Job Build mode. You
need to set the necessary copy settings beforehand, according to the type of originals and the desired
result.
• If you place the originals in the feeder, remove each original from the original output area when
scanning is complete.
• When copying, you can change or specify the following settings before scanning the next batch of
originals (i.e., between batches): the number of copies, 2-Sided Original mode, original type, copy
exposure, colour mode, and copy ratio. However, if you specify the Image Combination mode with the
Job Build mode, you cannot change the original type, copy exposure, colour mode, and copy ratio.
• If you use the Job Block Combination mode, the Job Build mode is automatically set for each batch of
originals. You cannot use the Job Build mode for the combined document.
1
Press [Scan Originals]
2
Press [Set].
3
Press [Done].
[Job Build].
Scan Originals Settings
7
7-43