Canon CLC5151 Copying And Mail Box Manual page 95

NOTE
If there is more than one reserved job waiting to print, only the last paper size/type specified for
the reserved print job is shown on the Paper Select screen.
4
Press [Done].
This completes the settings for reserving a print job using the stack bypass. The subsequent
steps show you how to start printing and load paper into the stack bypass.
5
Press [Start Print].
6
When it is time for the reserved print job to be printed, load the
specified paper into the stack bypass.
NOTE
• The specified paper size/type is displayed on the screen when it is time for the reserved print job
to be printed.
• Make sure to load the same paper size and type selected in step 3 into the stack bypass. Printing
does not start if paper of a different size or type is loaded.
7
Select the desired paper size.
If the following screen is displayed, adjust the width of the slide guides
press [OK].
specify the paper size
2-41
Reserving Jobs
2