Canon CLC5151 Copying And Mail Box Manual page 137

3
Press [XY Zoom].
4
Use the numeric keys on the touch panel display to enter values for the
original size and copy (record) size.
Press [X] (horizontal axis) for Original Size
Press [Y] (vertical axis) for Original Size
Press [X] (horizontal axis) for Copy Size
Press [Y] (vertical axis) for Copy Size
Press [OK].
If the computation results in a zoom ratio less than 25% or greater than 400%, a message
appears telling you that values below 25% will be set to 25%, and values above 400% will be
set to 400%.
NOTE
To specify the same copy ratio for both the horizontal (X) and vertical (Y) axes, press [Zoom].
5
Press .
enter a value.
enter a value.
enter a value.
enter a value.
Changing the Copy (Zoom) Ratio
3
3-21