Prepare Copy Jobs And Scan Jobs; Introduction To The Copy Function - Canon varioPrint 115 Operation Manual

Prepare copy jobs and scan jobs

Introduction to the Copy Function

Introduction
The copy function enables you to copy paper originals. You can define the settings of the copy
jobs manually or by using templates. Templates contain predefined settings for recurring types of
copy jobs.
The copy function contains a number of factory default templates, for example for copying
mixed-size originals or combining several sets of originals. Furthermore, you can define
customized templates. The factory default templates are directly available when you access the
copy function. When you select one of these templates, the system sets the typical settings for
the selected type of copy job automatically. Next you can define all other settings for the originals
and the output.
The table below show the factory default templates you can use to start a copy job or a scan job.
The Factory Default Templates
Overview of the templates
Template
[Copy job]
[Combined copy job]
[Copy to DocBox]
NOTE
[Copy to Doc-
Box]is only visi-
ble when your
system is equip-
ped with the op-
tional DocBox
function.
[Booklet job]
[Mixed size]
[Easy copy job]
[PDF scan job]
Canon varioPRINT DP line
When to use
Copy originals that have the same media size and only require
simple settings, for example two-sided or a staple.
Combine several sets of originals with the same or mixed media
size, and create one single copy job.
When you select this template, the possibility to add subsets is al-
ready displayed.
Send the job to the DocBox to get extended possibilities to pro-
grammed each page separately.
When you select this template, the destination of the copy job is
set to the first available DocBox. The destination is always set to
this DocBox, even when a different copy job destination has been
defined for the active workflow profile.
However, you can change the DocBox to which the job must be
sent.
Create booklets from paper originals.
When you select this template:
• The [Layout] setting is set to [Booklet], and
• The [Media] setting is set to A3/Tabloid, because the system as-
sumes you want to create booklets of A4/LTR originals.
Copy a set of originals that consists of different media sizes. The
output will also consist of these different media sizes.
Copy originals that only require simple settings: one-sided or two-
sided copy, zoom, media, staples, number of copies.
Scan originals to a PDF job that is stored in the DocBox. Now you
can use PDF datapath functionality such as page numbering.
Prepare copy jobs and scan jobs
Chapter 6 - Prepare the jobs
4
97