Recalling A Previous Copy Job (Recall) - Canon IR3250 User Manual

Recalling a Previous Copy Job
This feature enables you to recall up to three previously set copy jobs and make copies using these
settings.
NOTE
• One copy job is defined by setting the number of copies, exposure, zoom, etc. and pressing the
Reset
key when the Auto Clear function is on, or by calling up a copy job stored in memory. If one of these
keys was not pressed, or if the Auto Clear function is not active, calling up a copy job by pressing the
[Recall] key is not possible.
• Once stored, the three copy jobs are held in memory even if the power is turned to OFF.
• Standard settings are not stored.
• Additional Functions settings are not stored. For example, when the photo print mode is selected in the
Copy Basic Features screen, the photo mode cannot be recalled using the recall mode.
1
Place your originals and press the [Special
Features] key.
2
Press the [Recall] key.
(Recall)

Recalling a Previous Copy Job (Recall)

Start
or
3-51