Table of Contents
Advertisement
Configuration Using the Command Line Interface (CLI)
Privileged EXEC Mode
If you type enable in User EXEC mode, you can access Privileged EXEC mode. In this mode, the ES8508 allows
you to view current configuration, reset default, reload switch, show system information, save configuration,
and enter Global Configuration mode.
Type the following commands and press the Enter key:
•
configure terminal to access Global Configuration mode
•
exit to close the CLI.
•
? to see the command list.
•
list to review the Privileged EXEC mode commands and corresponding options.
For the complete list of commands and options, refer to
Switch>enable
Switch#
archive
clear
clock
configure
copy
debug
disable
dot1x
end
exit
hardware
list
no
pager
ping
quit
reboot
reload
show
telnet
terminal
traceroute
write
140 - Privileged EXEC Mode
manage archive files
Reset functions
Configure time-of-day clock
Configuration from vty interface
Copy from one file to another
Debugging functions
Turn off privileged mode command
IEEE 802.1x standard access security control
End current mode and change to enable mode
Exit current mode and down to previous mode
Hardware function
Print command list
Negate a command or set its defaults
Terminal pager
Send echo messages
Exit current mode and down to previous mode
Reboot system
copy a default-config file to replace the current one
Show running system information
Open a telnet connection
Set terminal line parameters
Trace route to destination
Write running configuration to memory, network, or terminal
(Global Configuration Mode
Privileged EXEC Mode
RocketLinx ES8508 Series User Guide: 2000575 Rev. A
on Page 141).
on Page 188.
Advertisement
Table of Contents
