Table of Contents
Advertisement
Configuration Using the Web Interface
Event Selection
Event Types can be divided into two basic groups: System Events and Port Events. System Events are related
to the overall function of the switch, whereas Port Events are related to the activity of specific ports.
System Event
Device Cold Start
Device Warm Start
Power 1 Failure
Power 2 Failure
Authentication failure
Time Synchronize
Failure
Fault Relay
DI1 Change
DI2 Change
Ring Event
Port Event
Link-Up
Link-Down
Both
Apply
118 - Event Selection
Power is cut off and then reconnected.
Reboot the device by CLI or web user interface.
Select this if you want the ES8508 to send notification of a PW1 failure.
Select this if you want the ES8508 to send notification of a PW2 failure.
An incorrect password or SNMP Community String is entered.
Accessing the NTP Server is failing.
Fault Relay has occurred.
The Digital Input#1 status has changed.
The Digital Input#2 status has changed.
A ring event has occurred.
The port is connected to another device.
The port is disconnected. For example, the cable is pulled out or the opposing
devices is down.
The link status changed.
Click Apply to apply the settings.
Note: You must Save the settings
settings if the ES8508 is powered off.
Warning is sent when....
Warning is sent when.....
(Page
129), if you want to maintain these
RocketLinx ES8508 Series User Guide: 2000575 Rev. A
Advertisement
Table of Contents
