Configuration Using the Command Line Interface (CLI)
DHCP Server
DHCP Server configuration
Lease time configure
DHCP Relay Agent
Show DHCP server
information
148 - Basic Settings (CLI)
Enable DHCP Server on ES8508 Switch
Switch#
Switch# configure terminal
Switch(config)# router dhcp
Switch(config-dhcp)# service dhcp
Configure DHCP network address pool
Switch(config-dhcp)#network 50.50.50.0/4 -(network/mask)
Switch(config-dhcp)#default-router 50.50.50.1
Switch(config-dhcp)#lease 300 (300 sec)
Enable DHCP Relay Agent
Switch#
Switch# configure terminal
Switch(config)# router dhcp
Switch(config-dhcp)# service dhcp
Switch(config-dhcp)# ip dhcp relay information option
<cr>
circuit-id
Configure Circuit-ID
remote-id
Configure Remote-ID
Switch(config-dhcp)# ip dhcp relay information option
option
Option82
Switch(config-dhcp)# ip dhcp relay information option
Switch# show ip dhcp server statistics
DHCP Server ON
Address Pool 1
network:192.168.17.0/24
default-router:192.168.17.254
lease time:300
Excluded Address List
IP Address
---------------
(list excluded address)
Manual Binding List
IP Address
---------------
--------------
(list IP & MAC binding entry)
Leased Address List
IP Address
---------------
--------------
(list leased Time remain information for each entry)
MAC Address
MAC Address
Leased Time Remains
--------------------
RocketLinx ES8508 Series User Guide: 2000575 Rev. A