Comtrol ROCKETLINX ES8508 User Manual page 181

Fault Relay Output (cont.)
Display
Syslog Configuration
Local Mode
Server Mode
Both
Disable
SMTP Configuration
SMTP Enable
Sender mail
Receiver mail
Authentication with
user name and
password
Disable SMTP
Disable Authentication
RocketLinx ES8508 Series User Guide: 2000575 Rev. A
Switch# show warning-event
Warning Event:
Cold Start: Enabled
Warm Start: Disabled
Authentication Failure: Disabled
Link Down: fa4-5
Link Up: fa4-5
Power Failure:
Ring: Disabled
Fault Relay: Disabled
Time synchronize Failure: Disabled
DI: Disabled
Switch(config)# log syslog local
Switch(config)# log syslog remote
192.168.250.33
Switch(config)# log syslog local
Switch(config)# log syslog remote 192.168.250.33
Switch(config)# no log syslog local
Switch(config)# smtp-server enable email-alert
SMTP Email Alert set enable ok.
Switch(config)# smtp-server server 192.168.250.100
ACCOUNT SMTP server mail account, ex: admin@comtrol.com
Switch(config)# smtp-server server 192.168.250.100
admin@comtrol.com
SMTP Email Alert set Server: 192.168.250.100, Account:
admin@comtrol.com ok.
Switch(config)# smtp-server receipt 1 abc@comtrol.com
SMTP Email Alert set receipt 1: abc@comtrol.com ok.
Switch(config)# smtp-server authentication username admin
password admin
SMTP Email Alert set authentication Username: admin,
Password: admin
Note: You can assign string to user name and password.
Switch(config)# no smtp-server enable email-alert
SMTP Email Alert set disable ok.
Switch(config)# no smtp-server authentication
SMTP Email Alert set Authentication disable ok.
Configuration Using the Command Line Interface (CLI)
Warnings (CLI) - 181