Comtrol ROCKETLINX ES8508 User Manual page 175

IGMP Snooping (Continued)
Display – IGMP
Snooping Setting
Display – IGMP Table
IGMP Query
IGMP Query V1
IGMP Query V2
IGMP Query version
IGMP Query Interval
IGMP Query Max
Response Time
Disable
RocketLinx ES8508 Series User Guide: 2000575 Rev. A
Switch# sh ip igmp
interface vlan1
enabled: Yes
version: IGMPv1
query-interval; 125s
query-max-response-time: 10s
Switch# sh ip igmp snooping
IGMP snooping is globally enabled
Vlan1 is IGMP snooping enabled
Vlan2 is IGMP snooping enabled
Vlan3 is IGMP snooping disabled
Switch# sh ip igmp snooping multicast all
VLAN IP Address
---- ---------------
1 239.192.8.0
1 239.255.255.250
Switch(config)# int vlan 1
Switch(config-if)# ip igmp v1
Switch(config)# int vlan 1
Switch(config-if)# ip igmp
Switch(config-if)# ip igmp version 1
Switch(config-if)# ip igmp version 2
Switch(config)# int vlan 1
Switch(config-if)# ip igmp
Switch(config-if)# ip igmp query-interval 60 (Change query
interval to 60 seconds, default value is 125 seconds)
Switch(config)# int vlan 1
Switch(config-if)# ip igmp
Switch(config-if)# ip igmp query-max-response-time 15 (Change
query max response time
seconds)
Switch(config)# int vlan 1
Switch(config-if)# no ip igmp
Configuration Using the Command Line Interface (CLI)
Type Ports
------- ------------------------
IGMP fa6,
IGMP fa6,
(Go to management VLAN)
(Go to management VLAN)
to 15 seconds, default value is 10
Multicast Filtering (CLI) - 175