Accessing The Options For A Command - Comtrol ROCKETLINX ES8508 User Manual

Configuration Using the Command Line Interface (CLI)

Accessing the Options for a Command

The following example illustrates how to view the description and options for a command. This example
illustrates the show command and the firmware version displayed may not reflect your firmware version.
Note: The ? does not appear on the screen.
1. If you type show? (without a space between show and the ?; do not press the Enter key) the ES8508
provides a basic description of that command.
Switch login: admin
Password:
Switch
switch> show
show
2. If you type show ? (with a space between show and the ?; do not press the Enter key) the ES8508 provides
information about the options for that command.
Switch> show
arp
gvrp
ip
version
Switch> show
3. Type show ip ? (with a space between show and the ?, do not press the Enter key) to review the options for
ip.
Switch> show ip
forwarding
route
4. Type show ip route and press the Enter key to view the IP routing tables for the ES8508.
Switch> show ip route
Codes: K - kernel route, C - connected, S - static, R - RIP, O - OSPF,
B - BGP, > - selected route, * - FIB route
S>* 0.0.0.0/0 [1/0] via 192.168.250.1, inactive
C>* 127.0.0.0/8 is directly connected, lo
C>* 192.0.0.0/8 is directly connected, vlan1
138 - Accessing the Options for a Command
(version 2.7 -20130314 - 15:23:41)
Show running system information
ARP table
GARP VLAN Registration Protocol
IP information
Displays ISS version
IP forwarding status
IP routing table
RocketLinx ES8508 Series User Guide: 2000575 Rev. A