Comtrol ROCKETLINX ES8508 User Manual page 157

MSTP
Switch(config)# spanning-tree mst
MSTMAP
configuration
forward-time
hello-time
max-age
max-hops
sync
Switch(config)# spanning-tree mst configuration
Switch(config)# spanning-tree mst configuration
Enter the MSTP
Configuration
Switch(config-mst)#
Tree
abort
end
exit
instance
list
name
no
quit
revision
show
Region Name:
Switch(config-mst)# name
NAME
Region Switch(config-mst)# name comtrol
Configuration
Region Revision:
Switch(config-mst)# revision
<0-65535>
Switch(config-mst)# revision 65535
Switch(config-mst)# instance
Mapping
<1-15>
Instance to
VLAN (Ex:
Switch(config-mst)# instance 1 vlan
Mapping VLAN
VLANMAP
2 to Instance 1)
Switch(config-mst)# instance 1 vlan 2
RocketLinx ES8508 Series User Guide: 2000575 Rev. A
the mst instance number or range
enter mst configuration mode
the forward delay time
the hello time
the message maximum age time
the maximum hops
sync port state of exist vlan entry
exit current mode and discard all changes
exit current mode, change to enable mode and apply all changes
exit current mode and apply all changes
the mst instance
Print command list
the name of mst region
Negate a command or set its defaults
exit current mode and apply all changes
the revision of mst region
show mst configuration
the name string
the value of revision
target instance number
target vlan number(ex.10) or range(ex.1-10)
Configuration Using the Command Line Interface (CLI)
Network Redundancy (CLI) - 157