Comtrol ROCKETLINX ES8508 User Manual page 149

DHCP Server (cont.)
DHCP Commands
DHCP Server Enable
DHCP Server IP Pool
(Network/Mask)
DHCP Server – Default
Gateway
DHCP Server – lease time
DHCP Server – Excluded
Address
DHCP Server – Static IP
and MAC binding
DHCP Relay – Enable
DHCP Relay
RocketLinx ES8508 Series User Guide: 2000575 Rev. A
Switch(config)# router dhcp
Switch(config-dhcp)#
default-router DHCP Default Router
end
Exit current mode and down to previous enable mode
exit Exit current mode and down to previous mode
ip IP protocol
lease DHCP Lease Time
list Print command list
network dhcp network
no Remove
quit Exit current mode and down to previous mode
service Enable service
Switch(config-dhcp)# service dhcp
<cr>
Switch(config-dhcp)# network
A.B.C.D/M network/mask ex. 10.10.1.0/24
Switch(config-dhcp)# network 192.168.10.0/24
Switch(config-dhcp)# default-router
A.B.C.D address
Switch(config-dhcp)# default-router 192.168.10.254
Switch(config-dhcp)# lease
TIME second
Switch(config-dhcp)# lease 1000
Switch(config-dhcp)# ip dhcp excluded-address
A.B.C.D IP address
Switch(config-dhcp)# ip dhcp excluded-address 192.168.10.123
<cr>
Switch(config-dhcp)# ip dhcp static
MACADDR MAC address
Switch(config-dhcp)# ip dhcp static 00C0.4E3A.0001
A.B.C.D leased IP address
Switch(config-dhcp)# ip dhcp static 00C0.4E3A.0001
192.168.10.99
Switch(config-dhcp)# ip dhcp relay information
option Option82
policy Option82
Switch(config-dhcp)# ip dhcp relay information option
Configuration Using the Command Line Interface (CLI)
(1000 second)
Basic Settings (CLI) - 149