Table of Contents
Advertisement
Configuration Using the Web Interface
802.1x Port Configuration Page
Port control
Reauthentication
Max Request
Guest VLAN
Host Mode
Admin Control Direction
Apply
Initialize Selected
Reauthenticate Selected Click to send an EAP Request to the requestor to request reauthentication.
Default Selected
802.1x Timeout Configuration
Re-Auth Period(s)
Quiet Period(s)
Tx Period(s)
Supplicant Timeout(s)
Sever Timeout(s)
Apply
114 - 802.1x Port Configuration
Force Authorized means that this port is authorized; the data is free to move
in/out. Force unauthorized is just the opposite, the port is blocked. To control
this port with a RADIUS server, select Auto for port control.
If this field is enabled, the ES8508 requests the client to re-authenticate.
The default time interval is 3600 seconds.
This is the maximum times that the ES8508 allows a client request.
The permitted range for this field is 0 to 4094. If this field is set to 0, that
means the port is blocked after an authentication failure. Otherwise, the
port is set to Guest VLAN.
If there is more than one device connected to this port, set the Host Mode to
Single, which means only the first PC to authenticate successfully can
access this port. If this port is set to Multi, all of the devices can access this
port once any one of them passes the authentication.
Use this to determine which devices can only send data or both send and
receive data.
Click Apply to apply the settings.
Click to set the authorization state of the selected port to initialize status.
Click to reset the configurable IEEE 802.1x parameters of selected port to
the default values.
Controls the re-authentication time interval (seconds), you can enter a
range of 1 - 65535.
When authentication fails, the ES8508 waits for a period and then tries to
communicate with the RADIUS server again.
The time interval of the authentication request.
The timeout for the client authentication.
The timeout for the server response for authentication.
Click Apply to apply the settings.
Note: You must Save the settings
settings if the ES8508 is powered off.
(Page
129), if you want to maintain these
RocketLinx ES8508 Series User Guide: 2000575 Rev. A
Advertisement
Table of Contents
