Limited Ip Multicast Address Commands; Create Mcast_Filter_Profile - D-Link DES-1210-52/ME Cli Reference Manual

LIMITED IP MULTICAST ADDRESS COMMANDS

The 802.1X commands in the Command Line Interface (CLI) are listed (along with the appropriate
parameters) in the following table.
Command
create
mcast_filter_profile
config
mcast_filter_profile
profile_id
config
mcast_filter_profile
profile_name
config
mcast_filter_profile
ipv6
delete
mcast_filter_profile
show
mcast_filter_profile
config
limited_multicast_addr
show
limited_multicast_addr
config
max_mcast_group
show
max_mcast_group
Each command is listed in detail, as follows:

create mcast_filter_profile

Purpose
Syntax
Description
Parameters
DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
Parameter
[ipv4 | ipv6] profile_id <integer 1-24> profile_name <string 20>
<integer 1-24> [[add | delete] <mcast_addr> | profile_name <string 20>]
<string 32> [[add | delete] <mcast_addr> | profile_name <string 20>]
[profile_id <integer 1-24> | profile_name <string 20>] [add | delete]
<mcastv6_addr>
[ipv4 | ipv6] [profile_id [all | <integer 1-24>] | profile_name <string 20>]
{[ipv4 | ipv6]} {profile_id <integer 1-24> | profile_name <string 3220
ports <portlist> [ipv4 | ipv6] {[add | delete] [profile_id <integer 1-24> |
profile_name <string 20>] | access [permit | deny]}
ports <portlist> {[ipv4 | ipv6]}
ports <portlist> [ipv4 | ipv6] max_group <integer 1-512>
ports <portlist> {[ipv4 | ipv6]}
To create multicast filtering profile on the Switch.
create mcast_filter_profile [ipv4 | ipv6] profile_id <integer 1-24>
profile_name <string 20>
The create mcast_filter_profile command displays the multicast
filtering profiles settings.
[ipv4 | ipv6] – Specify the IPv4 or IPv6 of multicast filter profile to be
created on the Switch.
profile_id <integer 1-24> - Specify the profile id of multicast filter
profile on the Switch.
profile_name <string 20> - Specify the profile name of multicast filter
290
38