IBM R30 Operator's Manual page 38

Emergency Eject
Note: Execute the following procedure only when the disc drawer does not eject after the
unload button is pressed.
1. Power-off the CD-ROM drive.
2. Insert a straight metal small-diameter rod such as a straightened paper clip into the
emergency eject hole as shown in the figure.
3. Pull the disc drawer out.
Disc Drawer
Cleaning the CD-ROM Drive
The CD-ROM drive has an internal cleaning mechanism and does not require an external
lens cleaning device. The internal cleaning mechanism cleans the head every time a disc is
inserted into the disc drawer.
2-18
Operator Guide
Unload Button
Straight Small-Diameter Metal Rod
Eject Hole