IBM R30 Operator's Manual page 116

7. Enter the appropriate IP addresses, and enter 99 to return to the MAIN MENU. A screen
similar to the following appears:
MAIN MENU
1. Select BOOT (Startup) Device
2. Select Language for these Menus
3. Send Test Transmission (PING)
4. Exit Main Menu and Start System (BOOT)
Type the number for your selection, then press "ENTER"
(Use the "Backspace" key to correct errors)
8. Enter 4 to exit from the menu, and start system boot.
9. A screen similar to the following appears as the system boots off the network:
STARTING SYSTEM (BOOT)
Booting . . .
Token–Ring:
Hardware address ................................... 10005AC97CF1
BOOTP
To find out more information on NIM (Network Install Manager), refer to AIX Version 4.1
Network Installation Management Guide and Reference , order number, SC23-2627.
3-54
Operator Guide
Please wait.
Slot 2, 16 Mb data rate
Packets Sent
00000
Packets Received
00000