Download Print this page

Advertisement

Set Configuration
This menu option enables you to configure or unconfigure units and devices.
1. Enter 3 in the main menu to select this option.
2. You should then see a first-level screen similar to the following. It displays the units and
devices that can be configured, along with their menu index number:
3. Enter the menu number to select a particular object. For example, if you enter 10, then a
second-level UNIT0 screen as shown below is displayed.
The second-level screen contains a status column and details about the unit.
UNIT0 Second-level Screen
4. Enter the object's menu number and then enter one of the following commands:
C: To configure the device.
D: To unconfigure the device.
T: To temporarily unconfigure the device. At the next power on or reset, the device is
automatically reconfigured.
For example: 06 D
Note: Devices that do not appear in the above list, cannot be changed.
Set Configuration
00 CPU0
01 CPU1
02 CPU2
03 CPU3
04 MC0
05 MC1
06 MC2
07 MC3
08 base MCA
09 exp MCA
.
select(x:exit):
UNIT0
Set
Status
00 dev0A C
C
01 dev0A D
02 dev1A C
A
03 dev1A D
04 dev3A C
C
05 dev3A D
06 dev4A C
C
07 dev4A D
08 dev5A C
C
09 dev5A D
select(x:exit):
unconfigures device 4A.
10 UNIT0 & dev
11 UNIT1 & dev
12 UNIT2 & dev
13 UNIT3 & dev
14 UNIT4 & dev
15 UNIT5 & dev
16 UNIT6 & dev
17 UNIT7 & dev
Set
Status
10 dev5B C
A
11 dev5B D
12 dev2A C
C
13 dev2A D
14 dev2B C
D
15 dev2B D
16 dev3B C
C
17 dev3B D
18 dev4B C
D
19 dev4B D
Using SystemGuard
3-17

Advertisement

   Related Manuals for IBM R30

This manual also for:

R40, R50

Comments to this Manuals

Symbols: 0
Latest comments: