Changing Flags And Parameters Under Aix Service Aids; Modifying Diagnostic Flags; Modifying The Modem And Site Configuration; Saving Or Restoring Flags And Configuration Information - IBM R30 Operator's Manual

Changing Flags and Parameters Under AIX Service Aids

The Service Aids are recommended to change the flags. The Service Aids can be entered
using the diag command or by booting diagnostics in service mode. They display or change
flag values using 0 (zero) for disabled and 1 (one) for enabled. The explanations that follow
refer to the Service Aids.

Modifying Diagnostic Flags

Use this procedure to modify diagnostic flags such as the Remote Authorization flag or the
Autoservice IPL flag. Starting from the Service Aids Selection menu:
1. Select the BUMP Service Aids option.
2. Select the Display or Change Flags and Configuration option.
3. Select the Change Diagnostic Flags option to display a menu of diagnostic flags.
4. Select a flag and enter its new value.

Modifying the Modem and Site Configuration

Use this procedure to modify modem and site configuration parameters such as the modem
configuration file name or the service line speed. Starting from the Service Aids Selection
menu:
1. Select the BUMP Service Aids option.
2. Select the Display or Change Flags and Configuration option.
3. Select the Change Modem and Site Configuration option to display a menu.
4. Select a flag and enter its new value.

Saving or Restoring Flags and Configuration Information

Use this procedure to save or to restore the configuration using a file. Starting from the
Service Aids Selection menu:
1. Select the BUMP Service Aids option.
2. Select the Save or Restore Flags and Configuration option.
3. Select either the Save or the Restore option.

Modifying the Remote Authorization Flag

This flag can be changed under SystemGuard using the stand-by or maintenance menus, or
under AIX using the diag command.

SystemGuard Stand-by Menu

Starting from the main stand-by menu:
1. Enter 1 (one) to set flags.
2. Enter 0 (zero) to change the Remote Authorization flag.
Modifying SystemGuard Parameters
B-3