Systemguard Test Group Descriptions; Bump Quick I/O Tests Group - IBM R30 Operator's Manual

SystemGuard Test Group Descriptions

The following is a description of the different test groups and the tests available under them.
All of these tests are performed automatically at Power-On with default parameters. They
can also be performed selectively (selection of test group/subtest/parameter) with user
configured parameters, under the control of the Off Line Test monitor. This is available as
one of the options in the Maintenance Menu under SystemGuard.

BUMP Quick I/O Tests Group

These tests are performed by the BUMP and are launched at Power-On under the control of
Off Line Test monitor, under the Maintenance Menu. These tests check the accessibility and,
the functions of the standard and direct I/O components from the BUMP. This group contains
the following list of tests.
Debug Asynchronus Line Test
This test checks the BUMP availability and access to the Flash EPROM. It consists of the
following sub-test.
Minimum Core Test This test is performed at Power-On. A specific text on the Debug
console is printed. The operator is required to check the result.
SystemGuard Test Groups
A-3