Download Print this page


Loading the CD-ROM Disc Caddy
Note: The disc caddy is not compatible with the Type C bezel CD-ROM drive.
The CD-ROM media kit contains a CD-ROM diagnostic disc and a disc caddy.
Open the disc caddy and place the CD-ROM disc in the caddy with the printed side up.
Hinged Cover
Loading Arrow
Insert the disc caddy into the disc caddy opening with the loading arrow towards the
CD-ROM drive and the printed side of the disc up. Push gently on the caddy. The drive
automatically pulls the caddy into the drive and prepares the disc for reading.
Disc Caddy Opening
Unloading the CD-ROM Disc Caddy
Push and hold the unload button until the caddy unloads. The CD-ROM drive partially ejects
the caddy from the drive opening. Pull the caddy out of the drive.
Note: The unload button must be pushed and held for a minimum of 2 seconds before the
caddy unloads.
Disc Caddy
If the disc caddy cannot unload and has to be removed manually from the drive, contact
your service representative.
Cleaning the CD-ROM Drive
The CD-ROM drive has an internal cleaning mechanism and does not require an external
lens cleaning device.
Operator Guide
Disc Caddy
Unload Button
(Printed Side Up)
Disc Caddy


   Related Manuals for IBM R30

This manual also for:

R40, R50

Comments to this Manuals

Symbols: 0
Latest comments: