IBM R30 Operator's Manual page 93

Modify/Display Test List
Once the test list is built, you can use this option to view or modify it. Each test is identified
by a number xxyy , where xx is the group number and yy is the test number.
1. Enter 2 in the OFF-LINE TESTS menu to view or modify the test list. The following menu
is displayed:
TEST LIST (xxyy: xx = GROUP NUMBER yy = TEST NUMBER):
0101–0102–0103–0104–0105–0106–0107–0108–0109–0110–0111–0112–0150–
0151–0152
COMMANDS: xxyy> SELECT TEST
SELECT [x:exit]:
2. Select the test to be displayed or modified. For example, enter 0302 to select test 2 from
group 3.
3. When a test is selected for modification, the following screen enables you to:
– Display test parameters (both default and current values).
– Modify parameter values (reserved for service people only).
– Delete tests from the list.
TEST: 0101 (01/01) – GROUP 01 BUMP QUICK IO
PARAMETER[1] = Sub test selection
0x00000000
PARAMETER[2] = Processor number
0x00000008
PARAMETER[3] = Part ID
0xffffffff
COMMANDS: (+: forward test –: backward test)
SELECT [x:exit]:
4. The following commands are available:
P n value [/ P n value. ..] This command is reserved for customer service representatives.
D
+
–
x
MODIFY/DISPLAY TEST LIST
– TEST 01 DEBUG LINE
DEFAULT VALUE = 0x00000000 – PRESENT VALUE =
DEFAULT VALUE = 0x00000008 – PRESENT VALUE =
DEFAULT VALUE = 0xffffffff – PRESENT VALUE =
Pn> CHANGE PARAMETER
D > DELETE TEST
Deletes the selected test.
Scrolls forward in the test parameter list.
Scrolls backward in the test parameter list.
Exits this menu and returns to the previous menu.
3-31
Using SystemGuard